ZyXEL Communications GS-4012F/4024 - Manual (Page 253)

GS-4012F/4024 User’s Guide
252 Chapter 41 Configure Clone
Advanced
Application
Select which port settings (you configured in the Advanced Application menus)
should be copied to the destination ports.
Apply Click Apply to save your changes to the switch’s run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to reset the fields.
Table 102 Configure Clone (continued)
LABEL DESCRIPTION