ZyXEL Communications GS-4012F/4024 User Manual
Page 52
GS-4012F/4024 User’s Guide
Chapter 4 The Web Configurator
51
Switch Setup
This link takes you to a screen where you can set up global switch parameters such
as VLAN type, MAC address learning, IGMP snooping, GARP and priority queues.
IP Setup
This link takes you to a screen where you can configure the IP address, subnet
mask (necessary for switch management) and DNS (domain name server) and set
up to 64 IP routing domains.
Port Setup
This link takes you to screens where you can configure settings for individual switch
ports.
Advanced Application
VLAN
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu).
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
Filtering
This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the RSTP/MRSTP to
prevent network loops.
Bandwidth
Control
This link takes you to screens where you can cap the maximum bandwidth allowed
from specified source(s) to specified destination(s).
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
form one logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
Port Security
This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port.
Classifier
This link takes you to a screen where you can configure the switch to group packets
based on the specified criteria.
Policy Rule
This link takes you to a screen where you can configure the switch to perform
special treatment on the grouped packets.
Queuing Method This link takes you to a screen where you can configure queuing with associated
queue weights for each port.
VLAN Stacking
This link takes you to a screen where you can configure VLAN stacking.
Multicast
This link takes you to a screen where you can configure various multicast features
and create multicast VLANs.
IP Application
Static Route
This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
RIP
This link takes you to a screen where you can configure the RIP (Routing
Information Protocol) direction and versions.
OSPF
This link takes you to screens where you can view the OSPF status and configure
OSPF settings.
Table 5 Navigation Panel Links (continued)
LINK
DESCRIPTION