ZyXEL Communications GS-4012F/4024 - Manual (Page 265)

GS-4012F/4024 User’s Guide
264 Chapter 42 Introducing Commands
arp Displays the ARP table. 13
dvmrp group Displays DVMRP group
information.
13
dvmrp interface Displays DVMRP interface
information.
13
dvmrp neighbour Displays DVMRP neighbour
information.
13
dvmrp prune Displays the DVMRP prune
information.
13
dvmrp route Displays the DVMRP routes. 13
igmp DIsplays the IGMP setting. 13
iptable all
[IP|VID|PORT]
Displays the IP address table. You
can sort the table based on the IP
address, VLAN ID or the port
number.
13
iptable count Displays the number of IP
addresses in the IP table.
13
iptable static Displays the status IP address
table.
13
ospf database Displays OSPF link state database
information.
13
ospf interface Displays OSPF interface settings. 13
ospf neighbor Displays OSPF neighbor
information.
13
route Displays IP routing information. 13
route static Displays IP static route
information.
13
tcp Displays IP TCP information. 13
udp Displays IP UDP information. 13
lacp Displays LACP (Link Aggregation
Control Protocol) settings.
13
logging Displays system logs. 13
loginPrecedence Displays login precedence
settings.
13
logins Displays login account information. 13
mac address-table
[mac|vid|port]>
Displays MAC address table.
You can sort by MAC address, VID
or port.
13
address-table
static
Displays static MAC address table. 13
address-table
count
Displays the number of entries in
the MAC address table.
13
mac-aging-time Displays MAC learning aging time. 13
Table 105 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE