ZyXEL Communications GS-4012F/4024 - Manual (Page 279)

GS-4012F/4024 User’s Guide
278 Chapter 42 Introducing Commands
no non-querier Disables non-querier mode on
the switch.
13
ospf Enables and enters the OSPF
configuration mode.
13
area Enables and sets the area ID. 13
area
authentication
Enables simple authentication for
the area.
13
area
authentication
message-digest
Enables MD5 authentication for
the area.
13
area
default-cost
<0-16777214>
Sets the cost to the area. 13
area
name
Sets a descriptive name for the
area for identification purposes.
13
area
stub
Enables and sets the area as a
stub area.
13
area
stub no-
summary
Sets the stub area not to send
any LSA (Link State
Advertisement).
13
area
virtual-link
Sets the virtual link ID information
for the area.
13
area
virtual-link
authentication
-key
Enables simple authentication
and sets the authentication key
for the specified virtual link in the
area.
13
area
virtual-link
authentication
-same-as-area
Sets the virtual link to use the
same authentication method as
the area.
13
area
virtual-link
message-
digest-key
md5
Enables MD5 authentication and
sets the key ID and key for the
virtual link in the area.
13
area
virtual-link
name
Sets a descriptive name for the
virtual link for identification
purposes.
13
exit Leaves the router OSPF
configuration mode.
13
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE