ZyXEL Communications GS-4012F/4024 User Manual
Page 276
GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands
275
snmp-server
trap-
destination
Disables sending of SNMP traps
to a station.
13
spanning-tree
Disables STP.
13
Disables STP on listed ports.
13
ssh
key
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
13
known-hosts
Removes the specified remote
hosts from the list of all known
hosts.
13
known-hosts
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
storm-control
Disables broadcast storm control. 13
syslog
Disables syslog logging.
13
server address> Disables syslog logging to the specified syslog server. 13 server address> inactive Enables syslog logging to the specified syslog server. 13 type [type] DIsables syslog logging for the specified log type ( sys , link , config , error or report ). 13 timesync Disables timeserver settings. 13 trunk 5|T6> Disables the specified trunk group. 13 5|T6> interface Removes ports from the specified trunk group. 13 5|T6> lacp Disables LACP in the specified trunk group. 13 vlan Deletes the static VLAN entry. 13 vlan1q gvrp Disables GVRP on the switch. 13 port-isolation Disables port isolation. 13 vlan-stacking Disables VLAN stacking. 13 password Change the password for Enable mode. 14 Table 106 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEGE