ZyXEL Communications GS-4012F/4024 - Manual (Page 262)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 261
42.11.2 Enable Mode
The following table describes the commands available for Enable mode.
[vlan
]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help Displays command help information. 0
traceroute Determines the path a packet takes to a device. 0
[vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
help Displays command help information. 0
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the specified SSH
version.
0
Table 104 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 105 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
baudrate
<1|2|3|4|5
>
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
13
boot config Restarts the system with the
specified configuration file.
13
configure Accesses Configuration mode.
See Section 42.11.3 on page 267 .
13
copy running-config
tftp
Backs up running configuration to
the specified TFTP server with the
specified file name.
13
running-config
interface port-
channel
Clones (copies) the attributes from
the specified port to other ports.
13
running-config
interface port-
channel
[bandwidth-
limit ....]
Copies the specified attributes
from one port to other ports.
13
tftp config
file>
Restores configuration with the
specified filename from the
specified TFTP server to the
specified configuration file on the
router.
13