ZyXEL Communications GS-4012F/4024 - Manual (Page 111)

GS-4012F/4024 User’s Guide
110 Chapter 13 Broadcast Storm Control
Figure 50 Broadcast Storm Control
The following table describes the labels in this screen.
Table 29 Broadcast Storm Control
LABEL DESCRIPTION
Active Select this check box to enable traffic storm control on the switch. Clear this check
box to disable this feature.
Port This field displays a port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per
second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives per
second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF) packets the
port receives per second.
Apply Click Apply to save your changes to the switch’s run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to reset the fields.