Xerox 4505/4505ps - Manual (Page 74)

P C L M e n u
3-28 ❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
State Saving Off*
On
Reserves memory for saving permanently downloaded
fonts and macros, when the printer switches from
using the PCL printer language to using the PostScript
printer language, or when the printer steps down in
Page Protection or Resolution .
When Off , all permanently downloaded fonts and
macros are cleared from memory when switching
PDLs. They must be downloaded again when the
printer switches back to PCL from PostScript.
When On , permanently downloaded fonts and
macros are stored in printer memory. You eliminate
the time to download them again when the printer
switches back to PCL.
Temporary fonts and macros are always
cleared at the end of every print job.
State Saving requires 10 MB (MegaBytes) of memory
if the PostScript option is installed. If the PostScript
option is not installed,
State Saving may be selected
with less than 10 MB. This will prevent loss of
downloaded PCL fonts and macros if applications
change the setting of
Resolution or Page
Protection . Enabling State Saving can have an
effect on printing speed with minimum memory
installed. It is recommended that this option not be
enabled without 10 MB of printer memory.
Figure 3.10 PCL Menu options showing factory settings (continued)
Option Setting Description
Note
AUG-CH03 Page 28 Black,Red,Cyan Friday, February 3, 1995 12:22 AM