Xerox 4505/4505ps - Manual (Page 106)

S y s t e m M e n u
3-60 ❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
Defaults Europe
USA Control of default paper size settings in various
menus.
There is no standard factory-set default for this
option; the default varies by world region.
When Europe , all paper size-related options are set to
A4 (210x297) and Form Length is set to 64.
When USA , all paper size-related options are set to
Letter (8.5x11) and Form Length is set to 60.
The Config. Sheet (page 3-62) is printed at Defaults
size, regardless of actual paper size.
Perform a Reset Menus (page 3-66) after
changing Defaults .
Power Saver
Note: This option is
available for firmware
releases > 4.0 only. To
determine the firmware
release of your printer,
print a Configuration
Sheet.
15 min.* (4505)
30 min.* (4510)
60 min.
90 min.
The Xerox 4505/4510 printers conform to EPA Energy
Star guidelines. The printer will enter a low power
state after 15 minutes of inactivity on the 4505 and
after 30 minutes of inactivity on the 4510. This
timeout is adjustable to 15, 30, 60 or 90 minutes via
this option.
When in the low power state, the printer displays
Power Saver Mode on the Control Panel. When a
print job is received while in the power saver mode,
the printer may require up to 30 seconds of warm up
time before the first sheet is fed from the input tray.
Figure 3.20 System Menu options showing factory settings (continued)
Option Setting Description
Note
AUG-CH03 Page 60 Black,Red,Cyan Friday, February 3, 1995 12:22 AM