Xerox 4505/4505ps - Manual (Page 164)

A d j u s t i n g t h e P r i n t D e n s i t y
6-12 ❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
The print density was adjusted at the factory to provide
optimum print quality. However, should you desire to darken
or lighten the print density, follow the steps below.
If the desired print density cannot be achieved, see
Chapter 7: Troubleshooting , “Print Quality Problems”
(page 7-29).
1 Select the System Menu (see page 3-57).
2 Select Print Density.
The print choices are from 0 to 4. 0 is the lightest and 4
is the darkest.
Adjusting
the Print
Density
AUG-CH06 Page 12 Black,Red,Cyan Friday, February 3, 1995 12:29 AM