Xerox 4505/4505ps - Manual (Page 111)

R e s e t M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-65
The Reset Menu offers several functions to reset various
printer functions.
Options in the Reset Menu are functions to be performed by
the printer rather than settings. There are no submenus.
Figure 3.23 shows the Reset Menu hierarchy .
Figure 3.23 Reset Menu hierarchy
Figure 3.24 (page 3-66) describes each Reset Menu function.
See “Setting a Menu Option” (page 3-10) for the steps in
performing a Reset Menu function.
For all types of reset (except Reset I/F/Cards for firmware
release 4.0), the printer clears any temporarily downloaded
fonts and print macros from memory, as well as ejects any
partially printed pages.
Reset Menu
Note
Reset Menu
Hierarchy
Reset Printer
Reset Menus
Reset I/f Cards
†
Reset All
Cancel PS Job
‡
Reset
† Appears only when an optional
network card is installed.
‡ Appears only when the
PostScript option is installed.
Note: The Reset I/f Cards
option (as shown at right) is
available for firmware
release 4.0 only.
To determine the firmware
release of your printer, print
a Configuration Sheet.
Reset Menu
Functions
Note
AUG-CH03 Page 65 Black,Red,Cyan Friday, February 3, 1995 12:22 AM