Xerox 4505/4505ps - Manual (Page 166)

T r a n s p o r t i n g t h e P r i n t e r
6-14 ❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
When transporting the printer more than a short distance,
follow the guidelines shown in Figure 6.1.
Figure 6.1 Hints for transporting the printer
Helpful Hints for Moving the Printer
Use the original shipping box and materials. If the original box or
materials are not available or are unusable, use a sturdy packing box and
a generous amount of cushioning or packing material.
1. Remove and pack the Multipurpose Tray.
2. Remove the EP cartridge and pack it in sturdy, light-proof material.
A sealed bag is recommended to prevent toner leakage.
3. Push in the Output Tray support so that it is flush with the
edge of the printer.
4. Disconnect and pack the printer. Remove and pack all printer cables.
If the printer is on a network, refer to your network software guide
or consult with the Network Administrator before disconnecting the
network cable.
5. Disconnect and pack the power cord.
6. Locate and pack all documentation for the printer.
7. Place the printer, accessories, and documentation in the
original box or in a similar box.
8. Make sure packing materials will inhibit breakage and jarring.
Transporting
the Printer
AUG-CH06 Page 14 Black,Red,Cyan Friday, February 3, 1995 12:29 AM