Xerox 4505/4505ps - Manual (Page 27)

L o a d i n g P a p e r
C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-15
2 Remove the tray from
the printer.
Place the tray on a flat
surface.
3 If necessary, adjust the
end guide to the
desired paper size and
the side guide to its
widest position.
Make sure that the end
guide is positioned in the
appropriate detent for
the paper size installed in
the tray. If the guide is
not positioned in the
detent, the printer may
not correctly recognize
the installed paper size.
See page 2-9 and page 2-13 for more information on
the standard and lower paper trays.
!
Caution
AUG-CH02 Page 15 Black,Red,Cyan Tuesday, March 21, 1995 5:06 PM