ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual
Page 75
Chapter 4 Bandwidth Management Wizard
P-660HWP-Dx User’s Guide
51
2 Click BANDWIDTH MANAGEMENT SETUP to configure the system for Internet
access.
Figure 40 Wizard: Welcome
3 Activate bandwidth management and select to allocate bandwidth to packets based on
the service requirements.
Figure 41 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 Use the second wizard screen to select the services that you want to apply bandwidth
management and select the priorities that you want to apply to the services listed.
Table 18 Bandwidth Management Wizard: General Information
LABEL
DESCRIPTION
Active
Select the Active check box to have the P-660HWP-Dx apply bandwidth
management to traffic going out through the P-660HWP-Dx’s port(s).
Select Services Setup to allocate bandwidth based on the service requirements.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.