ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 105)

Chapter 6 LAN Setup
P-660HWP-Dx User’s Guide
41
The following table describes the fields in this screen.
6.3.1 Configuring Advanced LAN Setup
To edit your P-660HWP-Dx's advanced LAN settings, click the Advanced Setup button in
the LAN IP screen. The screen appears as shown.
Figure 56 Advanced LAN Setup
The following table describes the labels in this screen.
Table 26 LAN IP
LABEL DESCRIPTION
LAN TCP/IP
IP Address Enter the IP address of your P-660HWP-Dx in dotted decimal notation, for
example, 192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Apply Click Apply to save your changes to the P-660HWP-Dx.
Cancel Click Cancel to begin configuring this screen afresh.
Advanced Setup Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
Table 27 Advanced LAN Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The P-660HWP-Dx supports both
IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Any IP Setup