ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 298)

Chapter 23 Troubleshooting
P-660HWP-Dx User’s Guide
36
23.2 P-660HWP-Dx Access and Login
V
I forgot the IP address for the P-660HWP-Dx.
1 The default IP address is 192.168.1.1 .
2 If you changed the IP address and have forgotten it, you might get the IP address of the
P-660HWP-Dx by looking up the IP address of the default gateway for your computer.
To do this in most Windows computers, click Start > Run, enter cmd, and then enter
ipconfig. The IP address of the Default Gateway might be the IP address of the P-
660HWP-Dx (it depends on the network), so enter this IP address in your Internet
browser.
3 If this does not work, you have to reset the device to its factory defaults. See Section 2.3
on page 46 .
V
I forgot the password.
1 The default user password is user. The default administrator password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
Section 2.3
on page 46 .
V
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1 .
• If you changed the IP address ( Section 6.2.1 on page 101 ), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for I forgot the IP address for the P-660HWP-Dx.
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See Appendix H on page 375 .
4 If you disabled Any IP ( Section 6.2.4 on page 103 ), make sure your computer is in the
same subnet as the P-660HWP-Dx. (If you know that there are routers between your
computer and the P-660HWP-Dx, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a
dynamic IP address. See Section 6.2.1 on page 101 . Your P-660HWP-Dx is a DHCP
server by default.
• If there is no DHCP server on your network, make sure your computer’s IP address is
in the same subnet as the P-660HWP-Dx. See Section 6.2.1 on page 101 .