ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 43)

P-660HWP-Dx User’s Guide
35
C
H A P T E R
2
Introducing the Web
Configurator
This chapter describes how to access and navigate the web configurator.
2.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy P-660HWP-
Dx setup and management via Internet browser. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768
pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the chapter on troubleshooting if you need to make sure these functions are allowed in
Internet Explorer.
2.2 Accessing the Web Configurator
"
Even though you can connect to the P-660HWP-Dx wirelessly, it is
recommended that you connect your computer to a LAN port for initial
configuration.
1 Make sure your P-660HWP-Dx hardware is properly connected (refer to the Quick Start
Guide).
2 Prepare your computer/computer network to connect to the P-660HWP-Dx (refer to the
Quick Start Guide).
3 Launch your web browser.
4 Type "http://192.168.1.1" as the URL.