ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 253)

Chapter 18 Universal Plug-and-Play (UPnP)
P-660HWP-Dx User’s Guide
49
18.3 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
18.3.1 Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.
Figure 146 Add/Remove Programs: Windows Setup: Communication
3 In the Communications window, select the Universal Plug and Play check box in the
Components selection box.
Allow UPnP to pass through
Firewall
Select this check box to allow traffic from UPnP-enabled applications to
bypass the firewall.
Clear this check box to have the firewall block all UPnP application
packets (for example, MSN packets).
Apply Click Apply to save the setting to the P-660HWP-Dx.
Cancel Click Cancel to return to the previously saved settings.
Table 106 Configuring UPnP
LABEL DESCRIPTION