ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual
Page 48
Chapter 2 Introducing the Web Configurator
P-660HWP-Dx User’s Guide
40
NAT
General
Use this screen to enable NAT.
Port Forwarding
Use this screen to configure
servers behind the P-660HWP-
Dx.
Security
Firewall
General
Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rules
This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing
Use this screen to change your anti-probing settings.
Threshold
Use this screen to configure the threshold for DoS attacks.
Content Filter
Keyword
Use this screen to block sites containing certain keywords in
the URL.
Schedule
Use this screen to set the days and times for the P-660HWP-
Dx to perform content filtering.
Trusted
Use this screen to exclude a range of users on the LAN from
content filtering on your P-660HWP-Dx.
Certificates
My Certificates
Trusted CA’s
Trusted Remote
Hosts
Directory Servers
Advanced
Static Route
Static Route
Use this screen to configure IP static routes.
Bandwidth
MGMT
Summary
Use this screen to enable bandwidth management on an
interface.
Rule Setup
Use this screen to define a bandwidth rule.
Monitor
Use this screen to view the P-660HWP-Dx’s bandwidth usage
and allotments.
Dynamic DNS
Dynamic DNS
Use this screen to set up dynamic DNS.
Remote MGMT
WWW
Use this screen to configure through which interface(s) and
from which IP address(es) users can use HTTPS or HTTP to
manage the P-660HWP-Dx.
Telnet
Use this screen to configure through which interface(s) and
from which IP address(es) users can use Telnet to manage the
P-660HWP-Dx.
FTP
Use this screen to configure through which interface(s) and
from which IP address(es) users can use FTP to access the P-
660HWP-Dx.
SNMP
Use this screen to configure your P-660HWP-Dx’s settings for
Simple Network Management Protocol management.
DNS
Use this screen to configure through which interface(s) and
from which IP address(es) users can send DNS queries to the
P-660HWP-Dx.
ICMP
Use this screen to change your anti-probing settings.
UPnP
General
Use this screen to enable UPnP on the P-660HWP-Dx.
Table 3 Web Configurator Screens Summary (continued)
LINK/ICON
SUB-LINK
FUNCTION