ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 285)

Chapter 20 Logs
P-660HWP-Dx User’s Guide
49
Table 125 Certificate Path Verification Failure Reason Codes
CODE DESCRIPTION
1 Algorithm mismatch between the certificate and the search constraints.
2 Key usage mismatch between the certificate and the search constraints.
3 Certificate was not valid in the time interval.
4 (Not used)
5 Certificate is not valid.
6 Certificate signature was not verified correctly.
7 Certificate was revoked by a CRL.
8 Certificate was not added to the cache.
9 Certificate decoding failed.
10 Certificate was not found (anywhere).
11 Certificate chain looped (did not find trusted root).
12 Certificate contains critical extension that was not handled.
13 Certificate issuer was not valid (CA specific information missing).
14 (Not used)
15 CRL is too old.
16 CRL is not valid.
17 CRL signature was not verified correctly.
18 CRL was not found (anywhere).
19 CRL was not added to the cache.
20 CRL decoding failed.
21 CRL is not currently valid, but in the future.
22 CRL contains duplicate serial numbers.
23 Time interval is not continuous.
24 Time information not available.
25 Database method failed due to timeout.
26 Database method failed.
27 Path was not verified.
28 Maximum path length reached.
Table 126 ACL Setting Notes
PACKET DIRECTION DIRECTION DESCRIPTION
(L to W) LAN to WAN ACL set for packets traveling from the LAN to the WAN.
(W to L) WAN to LAN ACL set for packets traveling from the WAN to the LAN.
(L to L) LAN to LAN/P-
660HWP-Dx
ACL set for packets traveling from the LAN to the LAN or
the P-660HWP-Dx.
(W to W) WAN to WAN/P-
660HWP-Dx
ACL set for packets traveling from the WAN to the WAN
or the P-660HWP-Dx.