Figure 28 internet connection with enet encap, Table 11 internet connection with enet encap – ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual
Page 65

Chapter 3 Wizard Setup for Internet/Wireless Access
P-660HWP-Dx User’s Guide
41
Figure 28 Internet Connection with ENET ENCAP
The following table describes the fields in this screen.
Table 11 Internet Connection with ENET ENCAP
LABEL
DESCRIPTION
Obtain an IP
Address
Automatically
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
Static IP
Address
Select Static IP Address if your ISP gives you a fixed IP address.
IP Address
Enter your ISP assigned IP address.
Subnet Mask
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing
subnetting.
Gateway IP
address
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
First DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
Second DNS
Server
As above.
Back
Click Back to go back to the previous wizard screen.
Apply
Click Apply to save your changes to the P-660HWP-Dx.
Exit
Click Exit to close the wizard screen without saving your changes.