TransAct Technologies ITHERM 280 - Manual (Page 255)

ITherm ® 280 Color Graphics iTherm ® 280 Programmer’s Guide
28-07764 Rev C Page 253
&%UQ& Report on user store
IPCL &%UQ&
Description The &%UQ& command prints a status report. The intention of the
command is to aid in universal graphic development.
&%UT Redefine User Store Termination Character
IPCL &%UT
Description This command allows the terminator used to signal the end of the name
field in User Store commands to be modified. The value of is used
for the terminator. The value of n may be from 0 to 255.
Example If &%UT% were sent to the printer the User Store command to run
universal graphic "Demo" would be &%URDemo%.
&%CL Set Print Color
IPCL &%CL
Description This command allows various colors to be selected on printer emulations
that do not support color text.
Where n: 0 Print with the Left cartridge (Typically Black)
1, 2, 3 Print with the Right cartridge (Typically Red, Blue, or Green)
&%UA Cycle Auto-Cutter
IPCL &%UA
1
>
2
>
3
>
Description This command feeds m/96 inches of paper and cycles the auto cutter.
Where m: m = m
1
* 100 + m
2
*10 + m
3