TransAct Technologies ITHERM 280 - Manual (Page 179)

iTherm ® 280 Programmer’s Guide Programming Codes
28-07764 Rev C Page 177
[ENQ] <21> Inquire printer ID
ASCII
[ENQ] <21>
Hexadecimal 05H 15H
Decimal
<5> <21>
Function The [ENQ] <21> command returns the printer IEEE 1284 ID string.
Response [ACK] <21> {ID string}
Where <21> is the echo of the command ID and is the number of return bytes in
the ID string {ID string} is the IEEE ID return string, which follows:
MFG:Ithaca-Periph.;
CMD:PJ1000CL,IPCL;
CLS:PRINTER;
MDL:1000 PcOS;
DES:Ithaca-Peripherals iTherm
® 280;
REV:PE1200-01.16
OPTS:$20xy
Where x is a bit field defined as follows:
bit 0 = 1 Red paper support
bit 1 = 1 Green paper support
bit 2 = 1 Blue paper support
bit 3 = Always 0
bit 4 = Always 1
bit 5 = Always 1
bit 6 = Always 0
bit 7 = Always 0
The y is a bit field defined as follows:
bit 0 = 0
bit 1 = Knife is installed.
bit 2 = 0
bit 3 = Always 0
bit 4 = Always 1
bit 5 = Always 1
bit 6 = Always 0
bit 7 = Always 0