TransAct Technologies ITHERM 280 - Manual (Page 136)

Programming Codes iTherm ® 280 Programmer’s Guide
Page 134 Rev C 28-07764
Function Load item from user store
ASCII [ESC] [US] l <0>
Hexadecimal 1BH 1FH 6CH
Decimal
<27> <31> <108>
IPCL &%UL <0>
EPOS [GS] 0 <0> is from one to 15 characters and must be null terminated.
Description The [ESC] [US] l <0> command loads the referenced item into the
appropriate structure. If the item referenced is a user-defined character set, it is
loaded into the current user-character definition, which does not affect the active
state of user-defined characters. If it is a macro, it is loaded into the macro
buffer, but it is not inserted into the data stream. [ESC] g <0> inserts the macro
buffer into the data stream. If the named item does not exist, the command does
nothing.
The terminating <0> may be replaced with an & or redefined. See [ESC]
[EM]T or &%UT>n> on page 136.
Function Run macro data from user store
ASCII [ESC] [US] r <0>
Hexadecimal 1BH 1FH 72H
Decimal
<27> <31> <114>
IPCL &%UR <0>
EPOS [GS] 0<Name..> <0> is from one to 15 characters and must be null terminated.
Description The [ESC] [US] r <0> command loads the referenced macro into the
macro buffer. The macro buffer is then inserted into the data stream. If the
named item does not exist or is not a macro, nothing happens.
The terminating <0> may be replaced with an & or redefined. See [ESC]
[EM]T or &%UT on page 136.
Function Flag item as a start-up macro
ASCII [ESC] [US] s <0>
Hexadecimal 1BH 1FH 73H
Decimal
<27> <31> <115>
IPCL &%US <0>
EPOS [GS] 0<Name..> <0> is from one to 15 characters and must be null terminated.
Description The [ESC] [US] s <0> command flags the referenced item to be
processed at startup. Only one user character definition and one macro may be
flagged to run at startup.
Note: If a character definition is loaded at startup, it is automatically made
active.
The terminating <0> may be replaced with an & or redefined. See [ESC]
[EM]T or &%UT on page136
Function Delete item from user store
ASCII [ESC] [US] d <0>
Hexadecimal 1BH 1FH 64H
Decimal
<27> <31> <100>