TANDBERG 6000MXP - Manual (Page 37)

37 D 13887.08
MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 6000 MXP
Data Ports
uSB interface.
For future use.
Data Ports
Data port 1 Data port 2
Pin Signal name Direction Signal name Direction
1 Carrier detect,
CD
From DCE Carrier detect,
CD
From DCE
2 Receive data,
RXD
From DCE Receive data,
RXD
From DCE
3 Transmit data,
TXD
To DCE Transmit data,
TXD
To DCE
4 1 Data terminal
ready, DTR
From DCE 12 V / 1 A
5 Signal GND Signal GND
6 Data set ready,
DSR
From DCE Data set ready,
DSR
From DCE
7 Ready to send,
RTS
To DCE Ready to send,
RTS
To DCE
8 Clear to send,
CTS
From DCE Clear to send,
CTS
From DCE
9 Ring indicator,
RI
From DCE Ring indicator,
RI
From DCE
1) The TANDBERG main camera is normally connected to data port 2 and pin No. 4
provides 12 V
dc / 1 A to the main camera. Otherwise the pin-outs are the same for the
two data ports.
Data port 1 (upper) and 2 (lower). The Data ports
are implemented as Digital Circuit Terminating
Equipment (DCE).
NoTe! The TANDBERG main camera is normally
connected to data port 2 and pin No. 4 provides
12 V
dc / 1 A to the main camera. Otherwise the pin-
outs are the same for the two data ports.
9-pin D-SuB pin-out
External view of socket
6 9
1 5