Optionkey, Osd callduration mode: Page 102: Netprofile, Cont
Page 102: Netprofile, Cont
102
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
NetProfile [1..7]
CallPrefix:
A call prefix can be added to each NetProfile. If a call prefix is added, this prefix will automatically be added in front of the number being dialled. This is useful if you have a fixed
prefix for a specific service provider.
Example:
xconfiguration netprofile 4 callprefix: 50
NetProfile [1..7]
CallSuffix:
A call suffix can be added to each NetProfile. If a call suffix is added, the suffix will automatically be appended to the number being dialled.
Example:
xconfiguration netprofile 2 CallSuffix: 24
NetProfile [1..7]
Network:
Defines what type of Network the NetProfile will use.
If set to Auto the system will parse the number to dial and decide what network to use based on this.
Example:
xconfiguration netprofile 4 network: h323
NOTE!
For NetProfile 1, 2, 3 and 7, the Network type is
predefined and cannot be changed by the user:
NetProfile Network
1 Auto
2 H320
3 H323
7 SIP
NTP
Mode:
If set to Auto, the system will use the NTP server, by which address is supplied from the DHCP server in the network.
If no DHCP server is used, or the DHCP server does not provide the system with a NTP server address, the system
will use the static defined NTP server address specified by the user.
If set to Manual the system will always use the static defined NTP server address specified by the user.
Example:
xconfiguration ntp mode: manual
The Network Time Protocol (NTP) is used to synchronize
the time of the system to a reference time server. The
time server will subsequently be queried every 24th hour
for time updates.
The system will use the time to timestamp messages
transmitted to Gatekeepers or Border Controllers requir-
ing H.235 authentication.
NTP
Address:
Defines the NTP server address. Will be used if NTP Mode is set to Manual or if set to Auto and no address is sup-
plied by a DHCP server.
Example:
xconfiguration ntp address:
OptionKey
Features:
The system requires a valid option key to activate MultiSite and/or Presenter functionality.
Example:
xconfiguration optionkey features: 5952754234583129
OptionKey
Bandwidth:
The system requires a valid option key to define the maximum bandwidth to use.
Example:
xconfiguration optionkey bandwidth: 9952754234483329
OSD
CallDuration
Mode:
The call duration can be displayed on screen. The timer showing the duration of the call is displayed in the bottom right corner of the screen.
Example:
xconfiguration osd callduration mode: on
NetProfile
cont...
— OSD