TANDBERG 6000MXP - Manual (Page 169)

169
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
Example:
*s BRI 1 (ready=True):
Channel 1 (type=BChannel, status=Idle): /
Channel 2 (type=BChannel, status=Disconnected):
CallingNumber: “8770”
CauseLocation: 0
ChannelCause: 41
ConnectionTime: 258
*s/end
*s BRI 2 (ready=True):
Channel 1 (type=BChannel, status=Connect):
CallingNumber: “8770”
ConnectionTime: 346
Channel 2 (type=BChannel, status=Connect):
CallingNumber: “8770”
ConnectionTime: 346
*s/end
*s BRI 3 (ready=True):
Channel 1 (type=BChannel, status=Connect):
CallingNumber: “8770”
ConnectionTime: 345
Channel 2 (type=BChannel, status=Connect):
CallingNumber: “8770”
ConnectionTime: 345
*s/end
BRI
cont...