Remoteswupgrade – TANDBERG 6000MXP User Manual
Page 204

204
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2
–
see
XACLI – Special commands – xpreferences
RemoteSwUpgrade
(status =
NA / Started / Checking / Completed / Aborted / NotValid / RestoringSettings / Failed/WrongPassword / Granted / NoDataLink / WrongFormat / ErrorWrite / WrongReleaseKey / Incompatible / FileToo-
Large / Requesting
)
If status =
Started
the following will be included:
Progress:
Example:
*s RemoteSwUpgrade (status=Started):
Progress: 12
*s/end
If status =
NA / Checking / Completed / Aborted / NotValid / RestoringSettings / Failed/WrongPassword / Granted / NoDataLink / WrongFormat / ErrorWrite / WrongReleaseKey / Incompatible / FileTooLarge / Requesting)
the following
will be included:
Example:
*s RemoteSwUpgrade (status=NA): /
*s/end
RemoteSwUpgrade