TANDBERG 6000MXP - Manual (Page 13)

D 13887.08
MAY 2008 13
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
For your protection please read these safety
instructions completely before you connect
the equipment to the power source. Carefully
observe all warnings, precautions and instruc-
tions both on the apparatus and in these
operating instructions.
Retain this manual for future reference.
Water and Moisture
Do not operate the apparatus under or •
near water – for example near a bathtub,
kitchen sink, or laundry tub, in a wet base-
ment, near a swimming pool or in other
areas with high humidity.
Never install jacks for communication •
cables in wet locations unless the jack is
specifically designed for wet locations.
Do not touch the product with wet hands. •
Cleaning
Unplug the apparatus from communication •
lines, mains power-outlet or any power
source before cleaning or polishing. Do not
use liquid cleaners or aerosol cleaners.
Use a lint-free cloth lightly moistened with
water for cleaning the exterior of the ap-
paratus.
Unplug the apparatus from communication •
lines before cleaning or polishing. Do not
use liquid cleaners or aerosol cleaners.
Use a lint-free cloth lightly moistened with
water for cleaning the exterior of the ap-
paratus.
Ventilation
Do not block any of the ventilation open- •
ings of the apparatus. Never cover the
slots and openings with a cloth or other
material. Never install the apparatus near
heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not place the product in direct sunlight •
or close to a surface directly heated by the
sun.
Lightning
Never use this apparatus, or connect/discon-
nect communication cables or power cables
during lightning storms.
Dust
Do not operate the apparatus in areas with
high concentration of dust
Vibration
Do not operate the apparatus in areas with
vibration or place it on an unstable surface.
Power Connection and Hazardous
Voltage
The product may have hazardous voltage •
inside. Never attempt to open this product,
or any peripherals connected to the prod-
uct, where this action requires a tool.
This product should always be powered •
from an earthed power outlet.
Never connect attached power supply cord •
to other products.
In case any parts of the product has visual •
damage never attempt to connect mains
power, or any other power source, before
consulting service personnel
The plug connecting the power cord to the •
product/power supply serves as the main
disconnect device for this equipment. The
power cord must always be easily acces-
sible.
Route the power cord so as to avoid it be- •
ing walked on or pinched by items placed
upon or against it. Pay particular attention
to the plugs, receptacles and the point
where the cord exits from the apparatus.
Do not tug the power cord. •
If the provided plug does not fit into your •
outlet, consult an electrician.
Never install cables, or any peripherals, •
without first unplugging the device from it's
power source.
Always use the power supply (AC–DC adap- •
tor) provided with this product (adaptor is
supplied with 3000
MXP only).
Replace only with power supply (AC–DC •
adaptor) specified by TANDBERG (adaptor
is supplied with 3000
MXP only).
Never connect attached power supply •
(AC–DC adaptor) to other products (adaptor
is supplied with 3000
MXP only).
Servicing
Do not attempt to service the apparatus •
yourself as opening or removing covers
may expose you to dangerous voltages or
other hazards, and will void the warranty.
Refer all servicing to qualified service
personnel.
Unplug the apparatus from its power •
source and refer servicing to qualified
personnel under the following conditions:
If the power cord or plug is damaged or •
frayed.
If liquid has been spilled into the •
apparatus.
If objects have fallen into the apparatus. •
If the apparatus has been exposed to •
rain or moisture
If the apparatus has been subjected to •
excessive shock by being dropped.
If the cabinet has been damaged. •
If the apparatus seems to be •
overheated.
If the apparatus emits smoke or •
abnormal odor.
If the apparatus fails to operate •
in accordance with the operating
instructions.
Accessories
Use only accessories specified by the
manufacturer, or sold with the apparatus.
Communication Lines
Do not use communication equipment to
report a gas leak in the vicinity of the leak.
Safety Instructions