TANDBERG 6000MXP - Manual (Page 25)

25 D 13887.08
MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
RJ-45 Connector pin-out ISDN BRI interface. ISDN I.420
(RJ-45 Jack) Basic Rate Interface
S/T (2B + D), 128 kbps per ISDN
I/F. Use any standard BRI cable
to connect the Codec to BRI.
S/T Interface
BRI Pin out
Pin 3 TX+
Pin 4 RX+
Pin 5 RX–
Pin 6 TX–
ISDN BRI sockets (not applicable to 3000 MXP Net)
Tip! Wherever applicable, the use
of Category 5 cabling or better is
strongly recommended! For HD camera
applications, however, Category 7.5 is
required.