TANDBERG 6000MXP - Manual (Page 174)

174
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
Example (see previous page for the status information applicable):
*s Call 1 (status=Synced, type=Vtlph, protocol=H320, direction=Outgoing, logTag=3):
CallRate: 384
Bonding: On
RemoteNumber 1: “8776”
RemoteNumber 2: “”
RemoteSubAddress: “”
Mute: Off
Microphone: On
Duration: 32
MuteOutgoing: Off
Channels 1 (type=Incoming):
Rate: 384
Restrict: Off
Encryption (status=On):
Type: AES-128
CheckCode: “BA8C78DAD933C3DD”
Audio (status=Active):
Protocol: AAC-LD
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: 2.5SIF
Rate: 317
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 384
Restrict: Off
Encryption (status=On):
Type: AES-128
CheckCode: “BA8C78DAD933C3DD”
Audio (status=Active):
Protocol: AAC-LD
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: 4CIF
Rate: 317
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
Call
cont...