TANDBERG 6000MXP - Manual (Page 153)

153
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Command Information
D 13887.08
MAY 2008
Required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Command Description Parameters Result parameters
when OK
Result parameters
when error
Example
DialGlobalEntry Command used to dial a
number from the global
directory (the Global
Directory is downloaded
to the system by an
external application). GlobalEntryId (r) : <1..400>
Reference to the directory entry to
be dialed.
CallRef: <1..11>
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1…>
Unique reference
to call. Identifies
the call in the call
log.
As above xcommand dialglobalentry globalentry-
id:19
*r Result (status=OK):
CallRef: 1
LogTag: 312
*r/end
OK
DialGroupEntry Command used to dial
an entry from the Group
Directory. Dialling from
the Group Directory
makes it possible to
set up a MultiSite
conference in one
operation. GroupEntryId (r) : <1..50 >
Reference to the directory entry to
be dialed.
The system
will return the
following elements
for each call
initiated.
CallRef: <1..11>
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1…>
Unique reference
to call. Identifies
the call in the call
log.
As above xcommand dialgroupentry groupentryid:19
*r Result (status=OK):
CallRef: 2
LogTag: 313
CallRef: 1
LogTag: 312
CallRef:
*r/end
OK
DialLocalEntry Command used to dial a
number from the locally
stored directory. LocalEntryId (r) : <1..200>
Reference to the directory entry to
be dialed.
CallRef: <1..11>
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1…>
Unique reference
to call. Identifies
the call in the call
log.
As above xcommand diallocalentry localentryid:15
*r Result (status=OK):
CallRef: 1
LogTag: 312
*r/end
OK
DialGlobalEntry — DialLocalEntry