TANDBERG 6000MXP - Manual (Page 197)

197
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
G703 (ready = True / False )
If ready = False the following will be included:
Layer1Alarm: RedAlarm / YellowAlarm / BlueAlarm
If ready = True the following will be included:
Channel [1..24 / 31] (status = NA / Idle / Calling / Answering / Proceeding / Connect / Disconnecting / Disconnected )
If status = NA / Idle the following will be included:
If status = Calling / Answering / Proceeding / Connect the following will be included:
CallingNumber:
ConnectionTime:
If status = Disconnecting/Disconnected the following will be included:
CallingNumber:
CauseLocation:
ChannelCause:
ConnectionTime:
Example:
G703