TANDBERG 6000MXP - Manual (Page 205)

205
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
Screensaver (status = On / Off )
If status = On the following will be included:
Example:
*s Screensaver (status=On): /
*s/end
If status = Off the following will be included:
Timer:
Example:
*s Screensaver (status=Off):
Timer: 37
*s/end
Screensaver