Omega RD200 - Manual (Page 76)

－７２－
11. OTHER PROGRAMMING 11.9 Tags
2
Programming Flow Chart
From TIC to 10 in CH 3
Operation screen
[Check]
＋

[To be ready for programming]

[Programming channel]
  
[Programming tag character]
,
  
Temporarily stored
Programming other channels?
＋
Stored
(1) Select the channel to be “none” with
or .*
(2) Press and
simultaneously to clear and perform
[temporarily stored] and then [stored].
* If the channel is programmed by a
numeric value and cleared, the
engineering unit of channel before
programming change is programmed
to be “none”.
Tag characters are displayed only for
the programmed channels (Digit Nos.
appear.).
• Press or to change
channels.
• The digit displaying a tag character
(digit No. with decimal point) shifts
with or .
• Numeric value (0 to 9):
to , and
• Alphabetical characters (A to Z):
Press and
simultaneously and select a character
by pressing or .
• Special characters (%, /, °C, °F)
% ( + )
/ ( + )
°C ( + )*
°F ( + )*
*A space corresponding to 2 digits is used.
• (space): A space is treated as
a character.
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is
printed.)
Various
keys
Channel
Cursor
YES
NO
Channel Tag character
SHIFT
2
TAG
DISP
SET
END
3
UNIT
°F
ENTRY
SHIFT
SET
END
Storing Reference 3
% /
SHIFT
0
CLEAR
To check all programmed digits
Reference 1
% /
°C °F
To program tag to “none” Remarks
SHIFT
SHIFT
SHIFT
SHIFT
0
CLEAR
9
LIST
－
(-)
SHIFT
6
A～Z
% /
%
/
°C
°F
SPACE
COPY(=)
Programmable characters
and key operation
Reference 2
Ref. 1
Ref. 2
Ref. 3
Remarks