Omega RD200 - Manual (Page 56)

－５２－
9. PRINTING 9.6 Time Axis Synchronization (POC)
1
Time Axis Synchronization (POC)
(1) This function is applicable to 2-pen, 3-pen and 4-pen
types. In the standard printings, data at the same
moment are printed on the chart paper with time axis
gaps due to the difference in pen positions between 1
st
pen and 2 nd to 4 th pens. (When POC = OFF)
(2) The time axis synchronization functions to store the data
of 2
nd
to 4
th
pens for the gaps and to print the stored data
after the chart paper is fed to the printing start point of
the 1st pen. (When POC = ON)
(3) The time axis synchronization is not available in 1-pen
types.
2
Flow Chart
for Selecting Time Axis Synchronization
From time axis synchronization Off to On
Operation screen
[Check]
（ ＋ ）
3 sec. or more
  
[To be ready for programming]
  
[Select ON]
  
Stored
Selected time axis synchronization (on or off) is stored
into memory. (Programming change mark is
printed.)
A marking as shown below is printed when the time
axis synchronization is switched to on or off.
0 9：2 5 ∗ ON
G1: Even when the printing is off, the
data for the gaps to 1st pen are
stored in memory.
G2: The data for the gaps to 1st pen,
which have been stored in
memory in the printing off, are
printed.
G: The data for the gaps is erased. An
option to backup this data is available .
Cursor
Reference 1
Installation positions for RD200
1st pen
2nd pen
Printing off
Time axis synchronization
Not executed
Printing on
1st pen
2nd pen
Printing off
Time axis synchronization
executed
Printing on
G1
G2
1st pen
2nd pen
Printing off
Time axis synchronization
executed
Printing on
G
Time axis
synchronization not executed
Time axis
synchronization executed
Power supply on/off
Storing Reference 1
Time axis synchronization. mark Reference 2
DISP
SET
END
% /
ENTRY
0
CLEAR
9
LIST
3rd pen
2nd pen
1st pen
4th pen
Chart feeding
direction
Program changed time
POC mark
On or off