Omega RD200 - Manual (Page 60)

－５６－
11. OTHER PROGRAMMING 11.1 Time
For programming date and time, press and simultaneously to display the “Clock” programming
screen. The default is Japanese time.
1
Programming Mode
  
2
Programming Flow Chart
From 00:00 hours on January 1st, 2000 to 15:40
hours on October 19th, 2000
Operation screen
[Check]
＋
   
[To be ready for programming]
   
[ Programming Year,
Month/Day, Time ]
   
Error message appears?
Stored
Clock data is maintained with a lithium
battery. The clock keeps on working
during the time that the power supply
is off or if the power supply is
interrupted. The service life of the
battery is for eight years under the
condition of eight hours operation in a
day.
Time display stops during
programming. Press to start
the display again.
The time is programmed with a 24-
hour display, which means that the
programming range is 00:00 to 23:59.

Cursor
Char
act
e
r
dis
p
la
y
Month Year Day Hour Minute
Time
Cursor
Hour
YES
Month Day Minute
NO
Clock circuit
Time display during
programming
Reference 1
Programming time
SHIFT
・
CLOCK
DISP
SHIFT
・
CLOCK
SET
END
ENTRY
Any key other
than
SHIFT
ENTRY
Reference 2
Numeric
keys
Year