Omega RD200 - Manual (Page 75)

－７１－
11. OTHER PROGRAMMING 11.9 Tags
Tags up to 9 digits can be assigned for digital data printing and scale printing.
Press and simultaneously to display the [Tag] programming screen. The default is no programming
of tags.
(Scale printing) (List printing)
1
Programming Mode
Note) The default is no programming of tags.
The following figure is an example of 9-digit tag programmed.
   
*1: Tag character
The character at the digit where the digit number is pointed by the cursor is displayed.
*2: Digit No. of tag character
A digit No. 1 to 9 is displayed by pressing .
Press and simultaneously to clear the digit No. and press for reprogramming a
new digit No.
If the scale is cleared in a channel; the tag of this channel is deleted. Reprogram it if necessary.

*1
Example of tag printing (RD200)
2
TAG
°F
SHIFT
Ta
g charact
e
r
Digit No. of tag character *2
(Up to 9 digits.)
(Fixed)
(Numeric numbers (1 to 9) appear for the digit not programmed by pressing .)
Chan
nel
Cu
rso
r
°F
°F SHIFT
0
CLEAR
If clear is stored in the scale mode;