Omega RD200 - Manual (Page 45)

－４１－
8. BASIC PROGRAMMING 8.2 Range/Printing Range
3
Programming Flow Chart
Range No. for channel 3: 22, RJ: Enable, Printing range: -50 to 450
°C
Operation screen
[Check]
＋
 
[To be ready for programming]
 
[Selecting channel]
→
 
[Selecting range No.]
→
 
[Programming RJ selection]
 
[Programming printing range]
 
Error message appears?
Temporarily stored
Programming other channels?
＋
Stored
Channel 1 range.
Other channels can be checked with
or .
• Cursor and programming lamp light.
• Cursor moves rightward when
pressing a numeric key.
Cursor moves rightward.
Cursor moves leftward.
Press or , and select
[3], then press .
Press and then press
again (range No. 22). See the next
page for the range No. table.
RJ (Reference Junction compensation):
0
→ Disable*
1
→ Enable
*For all inputs other than
thermocouple input, program to “0”.
Adding/deleting decimal point: Move
the cursor rightward and press
or .
• Programming “to”: Press and
simultaneously.
•
Decimal point is not included in the
number of programming digits.
An error occurs if a value exceeds the
programming range or unnecessary
space is entered.
Display moves to the next channel for
programming.
Store the [temporarily stored]
programmed values into memory.
Memory colon blinks and the
programming change mark is
printed.
YES
NO
YES
NO
Cursor
Channel
Range No.
RJ selection
Printing range *
Channel
*
Unused digits should be filled with spaces.
DISP
7
RANGE
SET
END
% / 
2
TAG
2
TAG
1
CHART
Function keys
ENTRY
Keys other than
SHIFT
/ %

℃
/ %

SHIFT
SET
END
SHIFT
2
TAG
2
TAG
SPACE
COPY(=)
・
CLOCK
SHIFT
－
(-)