Omega RD200 - Manual (Page 59)

－５５－
10. OPERATIONS 10.3 Alarm Display and Printing
1
Display of Alarm Activation
The alarm activation information can be checked in the operation screen.
1) Measured value display screen
(Note) The above example is for RD200. It is the same for
RD2800.
2) Alarm display screen
(Note) The above example is for RD200. It is the same for
RD2800.
(1) ALARM status lamp lights.
(2) The measured value of the channel in
alarm blinks.
(To cancel blinking)
Press . The measured value is
displayed steadily.
(1) The character display shows “”.
(2) The alarm type at the level, of which
the alarm is activated, is displayed for
each channel.
(3) ALARM status lamp lights.
(Note) If no alarm activates, the alarm
display screen is not displayed
even when is pressed.
2
Alarm Activation/Reset Printing
Alarm activation and reset are printed on the right side of the chart paper.
1) Printing format when an alarm activates
1 3 : 5 9 1 H 1
Time
Channel
Type
Level
2) Printing format when an alarm is reset
1 4 : 0 5 1 - 1
Time
Channel
Hyphen
Level
Alarm activated at CH 1 in 3-pen type Display in case alarm activated
Printing example of alarm activation
Display in case of alarm activated
Printing example of alarm reset
Alarm activated at CH 1 in 3-pen type
DISP
(1)
(2)
(1)
(2)
(3)
ENTRY