Omega RD200 - Manual (Page 40)

－３６－
7. PROGRAMMING 7.3 List of Programming Items
Names
Programming
items
Key operations
Programming
contents
Defaults Programming ranges
Ref.
page
Speed No. 1 1 to 3
Chart speed
(3 speeds) ＋
Speed 20/25*
0001 to 0600 mm/h or 0001 to 0200
mm/min
13.3
Terminal No. 1 1 to 4
Terminal
allocation ＋
(3 sec. or more)
Operation non
Selection from 13 items;
non, printing on/off & 3 kinds of chart
speed, message printing (No. 1 to 2),
message printing (No. 1 to 5), operation
record (A/B/C/D), digital data printing, list
printing (No. 1to 3) and totalizing reset
13.2
Printing No. A A, B, C, D
Remote
contacts
Operation
record ＋
(3 sec. or more) Printing
position
0
10 to 90%.
Printing position when the contact is
open. The printing position is at +5 mm
when it is shorted.
13.4
Format Sd
Select Ar from Sd (standard), Ar, SP, and
PL.
Channel
Not
programmed
1 to 4
Zero for range 1
Not
programmed
a (Minimum value ≤ a < b)
Span for range 1
Not
programmed
b (a < b < c)
Span for range 2
Not
programmed
c (b < c < d)
Span for range 3
Not
programmed
d (c < d < e)
Span for range 4
Not
programmed
e (d < e < f)
Automatic
range shift
(Ar)
＋
Span for range 5
Not
programmed
f (e < f
≤ maximum value)
14.1
Format Sd
Select SP from Sd (standard), Ar, SP, and
PL.
Channel
Not
programmed
1 to 4
Printing position
for broken point 1
Not
programmed
0 to a (%)
Printing position
for broken point 2
Not
programmed
a to 100 (%)
Scale at zero
Not
programmed
b (Minimum value
≤ b < c)
Scale for broken
point 1
Not
programmed
c (b < c < d)
Scale for broken
point 2
Not
programmed
d (c < d < e)
Compressed/
Expanded
(SP)
＋
Scale for span
Not
programmed
e (d <ｅ ≤ maximum value)
14.2
Format Sd
Select PL from Sd (standard), Ar, SP, and
PL.
CH for area 1
Not
programmed
1 to 4
CH for area 2
Not
programmed
1 to 4 (Except channels for
area 1)
CH for area 3
Not
programmed
1 to 4 (Except channels for
area 1 and 2)
Record
format
Zone scale
(PL)
＋
CH for area 4
Not
programmed
1 to 4 (Except channels for
area 1 to 3)
Area 1
and 2
only for
RD200
14.3
Protocol
＋
(3 sec. or more)
15.1
Communi-
cations
interface
Specifications
＋
(3 sec. or more)
For details, refer to the separate instruction manual for
“Communications Interface”.
15.2
* RD200: 20 mm/h, RD2800: 25 mm/h
SHIFT
0
CLEAR
0
CLEAR
5
DATA I
2
TAG
1
CHART
SHIFT
SHIFT
SHIFT
DISP
DISP
DISP
SHIFT
SHIFT
－
(-)
SPACE
COPY(=)