Omega RD200 - Manual (Page 32)

－２８－
6. BASIC OPERATION 6.2 Printing ON/OFF and chart end detection
1 Printing On/Off
Every time pressing then within 5
sec., the printing function switches to on or off.
When turning on the power supply, the printing
maintains the condition (on or off) when it was
turned off last time.
(1) When the printing is turned off, each pen
lifts up automatically. Even if the power is
turned off in this condition, this pen
position is maintained.
(2) When the chart cassette is pulled out,
each pen lifts up. If the printing has been
turned off when pulling out the chart
cassette, each pen has already been lifted
up and it maintains its position.
2 Printing Operation
The table below explains the printing operation
when the printing is on or off.
Operation ON OFF
Chart feeding Execute Stop
Trace printing
(Cartridge pen)
Execute
Up where it
is
Digital data printing
(Plotter pen)
Execute
Up at
standby
position
Up and down of pens Down Up
(1) The printing on/off operation is not executed
when the status KEY LOCK lights. For its
cancellation, see Section 11.13.
(2) The printing on/off operation is not executed
when the printing is turned off by the remote
contacts signal (option). See Section 13.1.
(1) appears for about 5 sec.
when pressing key. Press
during this display to execute the printing on/off
operation.
(2) The printing on/off operation cannot be
executed by pressing after this display
goes out.
In such case, press and then
again.
3
Chart End Detection
When the chart end is detected during the printing
is on, the printing is switched to off and
CHART END blinks. Each pen lifts up
automatically and the printing is stopped.
For continuing the printing, refer to “Chart loading”
in Section 5.1 and 5.2.
Printing status when turning on
the power supply
Status display when printing is on
No printing on/off operation executed Remarks 1
Execution by pressing key Remarks 2
Reference 1
Up and down of pens
REC
ON/OFF
ENTRY
ENTRY
REC
ON/OFF
ENTRY
ENTRY
Lights when the printing is on.
Printing ON
Status
RECORD ON lights.
Printing OFF
Status
RECORD OFF goes out.
REC
ON/OFF
ENTRY
→
Remarks 2
ENTRY
REC
ON/OFF
→
Remarks 1
 
REC
ON/OFF
ENTRY
Reference 2