Omega RD200 - Manual (Page 14)

－１０－
2. INSTALLATION 2.2 Installation to a Panel
Except portable types, your recorder is designed to install to a panel. Use a panel made of a steel plate of 2
mm to 6 mm in thickness.
RD200
Panel cutout size
Installation
(1) Insert your RD200 (pen type) into the panel
cutout from the front of the panel.
(2) Fix your RD200 (pen type) to the panel by the
mounting brackets (screw tightening torque: 1.0
N•m). Attach 2 mounting brackets to the top and
bottom of this instrument.
RD2800
Panel cutout size
Mounting method
(1) Insert your RD2800 (pen type) into the panel
cutout from the front of the panel.
(2) Gently screw a mounting screw into the screw
hole of the case (left, right).
(3) Attach the mounting bracket to the case by
putting the mounting screw in the large hole of
the bracket. Slide the bracket downward to
attach it closely to the panel and then tighten
the screw with a wrench (screw tightening
torque: 1.2 N•m).
Install your recorder to a panel.
360
36
0
281
+1
0
281
+1
0
(mm)
• Minimum clearance for
closed- installation
200
200
138
+1
0
138
+1 0
(mm)
Mounting bracket
Mounting bracket Panel thickness
(2 to 6 mm)
Mounting screw
Mounting bracket: Slide it
downward and tighten
with a wrench.
Panel
Mounting bracket
Panel thickness (2 to 6 mm)
Warning
1 1
2 2
• Minimum clearance for
closed- installation