Omega RD200 - Manual (Page 34)

－３０－
6. BASIC OPERATION 6.4 Switching Operation Screen (RD200)
For RD200, three operation screens, (1) measured value screen, (2) clock screen and (3) alarm activation screen,
are available. Each time is pressed, the screen switches. Bargraphs for analog indications are displayed in
any of these screens.
Measured value
screen
Clock screen
Alarm activation
screen
(Note) The alarm activation screen is only available when an alarm activates (shown by dotted lines). When
no alarm activates, this screen is skipped.
1 Measured value screen
The screen differs on Model No. (number of pens).
1) 1-pen type (CH 1)
3) 3-pen type (CH 1 to 3)
2 Clock screen
3 Alarm activation screen
This screen is only available when an alarm
activates.
For alarm types, see Section 11.5, item 1 .
2) 2-pen type (CH 1 and 2)
4) 4-pen type (CH 1 to 4)
When the power supply is turned on, the
measured value screen appears.
In each channel, the alarm level 1, 2, 3 and 4
are allocated to the digits from the left end.
The alarm type shall be displayed only at the
digit where an alarm activates.
Alarm type at level 1
Alarm type at level 2
Alarm type at level 3
Alarm type at level 4
Screen when turning on the
power supply
Explanation for alarm activation
Ｈ ｂ
DISP
DISP DISP DISP
Time Chart speed Ch 1
Time Ch 2 Ch 1 Chart speed
Ch 1 Ch 2 Ch 3 Chart speed
Ch 4 Ch 3 Ch 2 Ch 1
Chart speed Time Day Month Year
Reference