Ricoh Aficio Copy Machine 180 - Manual (Page 529)

Facsimile User Tools
144
7
INITIAL SETUP TX
When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode (Memory/Immediate
Transmission), scanning conditions
(Resolution, Original Type, Image
Density, and Auto Image Density)
and Auto Reset.
Note
❒ You can also choose whether the
machine returns to the home set-
tings after each communication.
⇒
P.184 “Changing the User Parame-
ters”
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
Fax
} key.
B
Press the
{{{{
User Tools/Counter
}}}} key.
C
Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Initial Setup TX” using the num-
ber keys.
The “Initial Setup TX” menu is
shown on the display.
E
Enter a function number using
the number keys.
Note
❒ If you make a mistake, press
Cancel and enter the correct
number.
F
Select the mode you want to
change using the
0 0 0 0 or 1 1 1 1 keys
then press [OK] .