P.66, B loading paper – Ricoh Aficio Copy Machine 180 User Manual
Page 207
Troubleshooting
52
6
When the PostScript option
is connected to the network,
data is being received by
the printer, but does not
print.
❖
Windows 95/98
On the
[PostScript]
tab, click
[Advanced]
and then un-
check both
[Send CTRL+D after job]
and
[Send CTRL+D
before job]
.
❖
Windows NT4.0
Open the
[Advanced]
tab of the Printer Properties. Un-
der
[PostScript Options]
, select
[No]
for both
[Send
CTRL-D After Each job]
and
[Send CTRL-D Before Each
job]
.
Printing does not start or in-
terrupted, when using the
PostScript option.
The data is cleared when the Job Timeout period is ex-
ceeded.
❖
Windows 95/98
Set a longer
[Job Timeout]
period with the
[PostScript]
tab of the Printer Properties.
❖
Windows NT4.0
Set a longer
[Job Timeout]
period with the
[Device Set-
tings]
tab of the Printer Properties.
A PostScript error might occur if there is not enough
memory in the printer, or there are errors in the print
data sent to the printer.
• In some cases, increasing the memory may solve this
problem. Install an optional memory unit (SDRAM).
For more information on the memory, see P.71 “Spec-
ifications”.
The print job might be reset. Do the following.
• Make sure that you have selected the correct printer
driver. Try printing again.
• Set a longer Wait Timeout.
❖
Windows 95/98
Set a longer
[Wait Timeout]
period with the
[Post-
Script]
tab of the Printer Properties.
❖
Windows NT4.0
Set a longer
[Wait Timeout]
period with the
[Device
Settings]
tab of the Printer Properties.
❖
Macintosh
You can specify a longer
[I/O Timeout]
period on the
printer's operation panel.
Possible Cause
Solutions