Ricoh Aficio Copy Machine 180 User Manual
Page 410
MEMORY TRANSMISSION
25
2
LIST OF FILES IN MEMORY (PRINT
TX FILE LIST)”
-
-
-
-If Memory Runs Out While
Storing an Original
If you run out of memory while stor-
ing an original (free space reaches
0%),
“Memory full”
is displayed.
Press Exit to transmit the stored pages
only.
Note
❒ By default, successfully scanned
pages are sent. If you wish to
change this setting, please contact
your service representative.
-
-
-
-Batch Transmission
If you send a fax message by Memory
Transmission and there is another fax
message waiting in memory to be
sent to the same destination, that
message is sent along with your orig-
inal. Several fax messages can be sent
with a single call, thus eliminating the
need for several separate calls. This
helps save communication costs and
reduce transmission time.
Fax messages for which the transmis-
sion time has been set in advance are
sent by batch transmission when that
time is reached.
Note
❒ By default Batch Transmission is
switched on. You can switch it on
or off with the User Parameters.
P.184 “Changing the User Parame-
ters”
-
-
-
-ECM (Error Correction Mode)
This feature automatically resends
data that wasn't transmitted success-
fully using a system that complies
with international standards.
ECM requires that the destination
machine has the same feature.
Note
❒ By default ECM is switched on.
You can change this with the Key
Operator Settings.
-
-
-
-Parallel Memory Transmission
This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
lows you to quickly determine
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion and is useful when you are in a
hurry and need to use the original for
another purpose.
Note
❒ By default this feature is turned on.
You can change this with the User
Parameters.