Ricoh Aficio Copy Machine 180 User Manual
Page 408
MEMORY TRANSMISSION
23
2
Document Feeder (ADF). After
you place the last page on the
exposure glass, you have 60 sec-
onds to insert the remaining
pages in the Document Feeder
(ADF).
❒ Note that you cannot set pages
on the exposure glass after you
have started using the Docu-
ment Feeder (ADF).
❒ Do not open the Document
Feeder (ADF) while it is scan-
ning in originals.
Note
❒ Place the original you want to
store in memory on the expo-
sure glass or the Document
Feeder (ADF). To store multiple
page originals from the expo-
sure glass, set them page by
page.
❒ You can scan half the pages of
your original from the exposure
glass and the remainder from
the Document Feeder (ADF).
When you have finished scan-
ning from the exposure glass,
place the rest of the pages in the
Document Feeder (ADF) and
press
{
Start
} .
❒ The original can be placed at
any time up until you press the
{
Start
} key.
Reference
P.17 “HOW TO SET AN ORIGI-
NAL”
C
Select any scan settings you re-
quire.
D
Dial. If you wish to send the same
message to more than one desti-
nation, press
[Add]
and dial anoth-
er destination. Repeat this step
for all destinations.
If you make a mistake, press the
{
Clear/Stop
} key and enter the cor-
rect number again.
Note
❒ If you do not set an original
within 30 seconds of entering a
destination fax number, the
transmission is cancelled.
Reference
E
Press the
{{{{
Start
}}}} key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the RTI or CSI in
the other end is shown on the dis-
play.
Reference