Preparing to use the netbeui protocol for printing – Ricoh Aficio Copy Machine 180 User Manual

Page 253

Windows NT 4.0 Configuration

Preparing to Use the NetBEUI Protocol for Printing

Follow these instructions to configure the Network Interface Board and Win-
dows NT to use the NetBEUI protocol.

Configuring the Printer

Configure your printer to use the NetBEUI protocol.
• Confirm that the NetBEUI protocol is set to be active. (The factory default is

active.)

Reference

For more information on how to make the above settings, refer to the Operat-
ing Instructions for your printer.

Configuring a Windows NT Computer

Install the NetBEUI protocol into a Windows NT computer, and enter the LAN
adapter number (Lana Number).

Double-click the

[Network]

icon in the

[Control Panel]

, and confirm that “Net-

BEUI Protocol” is in the

[Network protocols]

box of the

[Protocols]

tab.

Note

❒ If the NetBEUI protocol is not installed, click

[Add]

in the

[Protocols]

tab,

and install it. For more information, refer to the Windows NT online help.

Change the Lana Number. Click the

[Services]

tab, select the

[NetBIOS inter-

face]

of the

[Network Services]

box , and click

[Properties]

Select the Lana Number corresponding

[Nbf protocol]

of the

[Network route]

headline, and click

[Edit]

Input “0” as the Lana Number.

Note

❒ If the other protocol's Lana Number is configured with “0”, you must

change the Lana Number a number other than “0”.

Click

[OK]

Click

[close]

, and close the

[Network]

dialog.

After confirming the message for restart, click

[Yes]

Note

❒ When you change the Lana Number, You must restart.