Ricoh Aficio Copy Machine 180 - Manual (Page 314)

Message List
79
5
❖ When using SNMP
Error numbers in the messages are codes for internal use.
Exit snmpd The agent is complete. Reset the printer
or turn the printer off and on.
recvfrom:packet discarded,length(Recep-
tion packet length)> (Packet size),from
addr The received packet was ignored since
the length of the packet exceeds the limit.
Confirm whether the administration sta-
tion sent a packet whose length is longer
than 1025 bytes.
session
not defined The community name of the received
packet is not defined. Confirm that the
community name of the administration
station is the same as that specified to the
printer.
snmpin:Bad use of session Name> from The community name of the received
packet is not the same as that of the ad-
ministration station. Confirm the com-
munity name specified to the printer.
snmpin:error in snmpdecipher,code (ror No.>) An error occurred on the received packet.
Check if the number of the objects sent
from the administration station is more
than 31 and if there are wrong MIB re-
quests.
snmpin:error in snmpservsend,code (ror No.>) Cannot send a response packet. Normal-
ly, this message is followed by the mes-
sages below *1 *2.
snmpin:pkt too large,code (ber>)
*1
The response packet to the request is too
big to send. Reduce the number of the ob-
jects per request.
snmpin:error in sending too large request
back,code (),giving up
*2
The packet notifying the error is too big to
send. Reduce the number of the objects
per request.
snmpin:received bad version The version of the received packet is in-
valid. Confirm that the version of the ad-
ministration station is version-1(0).